OSIRIS-REx did its Closest Flyover Yet, just 250 Meters Above its Sample Site

NASA’s OSIRIS-REx is getting closer, physically and temporally, to its primary goal. The spacecraft arrived at Bennu at the end of 2018, and for just over a year it’s been studying the asteroid, searching for a suitable sampling site. To do that, it’s getting closer and closer.

OSIRIS-REx stands for Origins, Spectral Interpretation, Resource Identification, Security-Regolith Explorer. The heart of the mission is the sample it’ll collect from asteroid Bennu. That sample will eventually make its way back to Earth for study.

The OSIRIS-REx team selected a sampling site very carefully. When the spacecraft arrived at asteroid Bennu, NASA found that the surface of the asteroid was more challenging than they thought. Though the surface contains an abundance of the right sized material for the spacecraft’s sampling mechanism, there are plenty of hazards to be avoided.

Bennu’s boulder-strewn surface. Image Credit: NASA/University of Arizona.

Eventually, the OSIRIS-REx team came up with a list of four potential sampling sites. They then did more fly-overs of the four, to take an even closer look. From there, they chose two sampling sites: a primary site and a secondary site. All four of the sites received avian-themed names, and at the end of the process, NASA chose Nightingale as the primary site, and Osprey as the backup site.

Nightingale is the primary sampling site for NASA’s OSIRIS-REx spacecraft. Image Credit: NASA/University of Arizona

Throughout the site selection process, OSIRIS-REx reconned Bennu in three phases: Recon A, B, and C. During each phase, it got progressively closer to the surface, gathering more detail on each site. Now, in recon phase C, the spacecraft has performed its closest flyover yet. On March 3rd, it flew over Nightingale at an altitude of only 250 meters (820 ft).

The spacecraft’s safe-orbit height is one km (0.6) miles, but for about five hours, OSIRIS-REx left that safety behind. The Nightingale site is in a crater, and it’s about 16 meters (52 ft) wide. During the maneuver, all of the science instruments were aimed at the sampling site.

On Mar. 3, the OSIRIS-REx spacecraft performed a low-altitude flyover of site Nightingale. During the pass, science observations of asteroid Bennu took place from a distance of approximately 820 ft (250 m) – the closest the spacecraft has ever been to the asteroid’s surface. The primary goal of this flyover was to collect high-resolution imagery for the team to locate the site’s best areas for collecting a sample.
Credits: University of Arizona

While all of the science instruments were operating, this flyover is mostly about the spacecraft’s PolyCam imager. PolyCam is an 8-inch telescope, and the closer it gets to Bennu, the higher resolution images it acquires.

The OSIRIS-REx instrument deck. The PolyCam imager is an 8-inch telescope. Image Credit: By NASA/University of Arizona – http://www.asteroidmission.org/galleries/#graphics (image link), Public Domain, https://commons.wikimedia.org/w/index.php?curid=52203041

After the flyover OSIRIS-REx returned to its safe home orbit, but in the opposite direction. Now it’s ready for its next big maneuver, the sampling rehearsal.

There’ll be two sampling rehearsals, and the first one is scheduled for April 15th. The spacecraft will make its closest approach then, coming to within 125 meters (410 ft) of Bennu’s surface. But it’s not done there. At that altitude it’ll perform what’s called the Checkpoint maneuver. It’ll descend even closer to the Nightingale site, and after descending for about 10 minutes, it’ll stop its descent at 50 meters (164 ft.) and begin backing away from the asteroid.

OSIRIS-REx will perform two sampling rehearsals before it performs the actual sampling maneuver. Image Credit: Lauretta et al 2017

Then in June OSIRIS-REx will perform its second rehearsal. But this time, it’ll get just a little closer, to between 25 to 40 meters (82 to 131 ft.) before backing away. As OSIRIS-REx performs each approach, it’ll be gathering more data on the sampling site. It’ll also be “training” its Natural Feature Tracking (NFT) system. The NFT uses images of Bennu’s surface to guide itself, comparing onboard images with real-time camera input to avoid hazards and nail its sampling operation.

The actual sampling maneuver is scheduled for late August 2020. At that time, OSIRIS-REx will come close enough that its sampling mechanism touches the surface. Then it’ll fire a charge of nitrogen gas to kick-up some regolith, and capture some of it. Then it’ll back away.

Mission operators won’t be surprised if the spacecraft’s NFT system cancels the sampling attempt. The system has a built-in fail-safe. OSIRIS-REx can perform multiple sampling attempts, so there’s no need to commit to a maneuver that is deemed unsafe by the spacecraft’s automated systems. If the first attempt at Nightingale doesn’t work, OSIRIS-REx can either try and collect from Nightingale again, or move to the backup site, Osprey.

Eventually, if all goes well, OSIRIS-REx will return to Earth and release the Sample Return Capsule (SRC) into Earth’s atmosphere, where it will deploy a parachute and float down to the surface. It’s expected to land at the Utah Testing and Training Range, where it will be retrieved.


Evan Gough

Recent Posts

SpaceX Starship Passes Static Fire Test With Three Raptor Engines, Finally Gets Nose Cone!

The Starship is coming together, literally and figuratively! With its three Raptor engines test fired,…

3 hours ago

The Color of Habitable Worlds

“This is where we live. On a Blue Dot.” said Carl Sagan when the now…

8 hours ago

Mixing Science and Art, One Painting at a Time

All her life, Laci Shea Brock has needed to be creative and inventive. So, perhaps…

13 hours ago

About 3% of Starlinks Have Failed So Far

A new analysis indicates that 3% of Starlink satellites have failed since they were launched…

1 day ago

New Receiver Will Boost Interplanetary Communication

As we explore the solar system, we'll need an interplanetary communication network that can keep…

1 day ago

Geologists Have Found the Earth’s Missing Tectonic Plate

Northern Canada has been keeping a secret from the rest of the world. It's home…

2 days ago