Woohoo! JWST's Mid-Infrared Instrument is Fully Operational Again

The NASA/ESA/CSA James Webb Space Telescope’s mid-infrared view of the Pillars of Creation. Credit: NASA, ESA, CSA, STScI, J. DePasquale (STScI), A. Pagan (STScI)

Engineers with the James Webb Space Telescope have figured out a way to work around a friction issue that arose with the telescopes’ Mid-Infrared Instrument (MIRI). The team is now planning to resume observations with the instrument’s medium resolution spectrometry (MRS) mode, which has not been used since August.

Schematic diagram of the MIRI instrument. Credit: University of Arizona

On August 24, while preparing for observations with MIRI’s MRS mode, the team detected increased friction with one of the wheels, describing the friction as ‘grating’ or ‘sticky.’ The function of the wheel is to select between short, medium and longer wavelengths.

Engineers and scientists agreed to pause observations in this mode until the teams could convene to carry out in-depth investigations of the problem. They looked at the design of the instrument and wheels, as well as historical and post-launch data. In the meantime, the other MIRI modes worked fine, as well as the other three instruments, the Near Infrared Camera (NIRCam), the Near Infrared Spectrometer (NIRSpec), and the Fine Guidance Sensor/Near Infrared Imager and Slitless Spectrograph (FGS/NIRISS).

Remove All Ads on Universe Today

Join our Patreon for as little as $3!

Get the ad-free experience for life

MIRI (wrapped in its aluminized thermal shield) integrated into the JWST Integrated Science Instrument Module (ISIM). Credit: NASA/Goddard Space Flight Center/Chris Gunn

In a JWST blog post, the team said they concluded the issue is likely caused by “increased contact forces between sub-components of the wheel central bearing assembly under certain conditions.” Based on this, the team developed and vetted a plan for how to use the affected mechanism during science operations.

They tested the plan with an engineering test on November 2, which successfully demonstrated predictions for wheel friction. The plan is now for JWST to resume MIRI MRS science observations by Saturday, Nov. 12.

And just in time too. Observations of Saturn’s polar regions have been scheduled, and should now be able to be performed, just before those regions of Saturn become unobservable by the telescope for the next 20 years.

This grey-scale image of Saturn’s northern polar vortex was captured by the Cassini spacecraft. This image was captured from a distance of about 1.2 million km. A portion of Saturn’s rings are barely visible in the top right. Image: NASA/JPL-Caltech/Space Science Institute.

If all goes well, the team will schedule additional MRS science observations, initially at a limited cadence, they said, following a plan to keep the affected wheel in balance, monitor wheel health, and prepare MIRI MRS for a return to full science operations.

MIRI is one of the most important instruments onboard. It allows the telescope to see in the wavelength range from 5 to 27 micrometers. The instrument has 4 modes: imaging, medium-resolution spectroscopy, low-resolution spectroscopy, and coronagraphy.

Nancy Atkinson

Nancy has been with Universe Today since 2004, and has published over 6,000 articles on space exploration, astronomy, science and technology. She is the author of two books: "Eight Years to the Moon: the History of the Apollo Missions," (2019) which shares the stories of 60 engineers and scientists who worked behind the scenes to make landing on the Moon possible; and "Incredible Stories from Space: A Behind-the-Scenes Look at the Missions Changing Our View of the Cosmos" (2016) tells the stories of those who work on NASA's robotic missions to explore the Solar System and beyond. Follow Nancy on Twitter at https://twitter.com/Nancy_A and and Instagram at and https://www.instagram.com/nancyatkinson_ut/