Space Exploration Technologies

A Detailed Design for a Space Station at Sun-Earth L2

New ideas in space exploration come from all corners, and, by and large, the community welcomes anybody interested in the field. Having just read A City on Mars, it seems that even people who disagree with the idea that the age of space settlement is imminent will be accepted into the fold by enthusiasts. Now, a new entrant has joined – Daniel Akinwumi is a Nigerian graduate student at the University of Strathclyde who recently published his Master’s thesis detailing the design of the “intergalactic hub,” or I-HUB.

The introductory section of the thesis lays out many of the challenges familiar to those interested in space habitats. These include the importance of robots, a completely closed-loop recycling system, and novel radiation shielding. Mr. Akinwumi also provides a thorough literature search and mentions several other design concepts similar to the I-HUB.

One crucial design choice is how to get the system into space. As of the time of writing, I-HUB will use Starship, the largest rocket ever developed, which is still being tested. Many of the other selected systems for the I-HUB would utilize technologies developed elsewhere, such as NASA’s ECLSS life support system or standard RTGs for a power source.

We previously discussed an idea to turn an asteroid into a giant rotating space habitat.

Food is essential for any long-term habitat, and the paper looks closely at different food-production systems for use in space. NASA’s Vegetable Production System is one of the most highly developed and could be used on the I-HUB with little modification. Propulsion is another key system, with I-HUB being designed behind an extensive solar electric propulsion system that would allow it to research its deep-space destination of the Earth/Sun L2 point.

Ideally, the system would be built in order, but plenty of work on robotic assemblers must take place before that will be a possibility. Any such assembly would also have to occur near Earth, as sending an army of assemblers to the L2 point would be prohibitively expensive. But the views from L2 would be spectacular, as the paper points out the site could be a helpful platform for scientific inquiry – it already houses several large-scale telescopes, including Euclid.

Model of the interior of one of I-HAB’s modules.
Credit – Daniel Akinwumi

Once installed, the intent of I-HUB isn’t to remain static but to continue to grow by adding additional modules over time to increase both its physical and operational capacity. Modular designs of the modules that would connect would be critical to this feature and would be similar to how the different modules connect on the ISS.

Some of the modules might even rotate to decrease microgravity’s harmful effects on the long-term health of I-HUB’s residents. It will also have an integrated communication system and, as mentioned above, a closed-looped resource recycling/life support system. 

Mr. Akinwumi also detailed budgets for various systems, such as power and mass, and the expected overall cost of the station. In his analysis, he fleshed out some of the inherent risks in the system and detailed how they could be mitigated with future development work. Some of these would include multiple redundancies of the life-support systems and various layers of radiation shielding. 

Overall, the plan for I-HUB seems reasonable and weighs in at a hefty 71 pages – probably a little above average for an MS thesis. However, those pages have little new ideation details; it’s more a collection of ideas already detailed in other resources and in much more detail than even this thesis would allow. It’s a good start on a promising research line, and hopefully, Mr. Akinwumi will continue with his PhD and can delve further into the details of his I-HUB idea.

Learn More:
Daniel Akinwumi – Design and Analysis of the Technical Infrastructure for a Self-Sufficient and Sustainable Intergalactic Hub
UT – A New Paper Shows How To Change An Asteroid Into A Space Habitat – In Just 12 Years
UT – Check out This Amazing Fly-through of a Futuristic Space Habitat
UT – Lockheed Martin Shows off its new Space Habitat

Lead Image:
Artist’s depiction of the location of the I-HAB space habitat.
Credit – Daniel Akinwumi

Andy Tomaswick

Recent Posts

China Names its Capsule and Lander for its Upcoming Human Lunar Missions

In a recent announcement, the Chinese Space Agency (CSA) unveiled the names for its forthcoming…

12 hours ago

If Exoplanets Have Lightning, it’ll Complicate the Search for Life

Discovering exoplanets is almost routine now. We've found over 5,500 exoplanets, and the next step…

16 hours ago

Electrodes in Spacesuits Could Protect Astronauts from Harmful Dust on Mars

To quote NASA associate administrator Jim Reuter, sending crewed missions to Mars by 2040 is…

16 hours ago

Odysseus Moon Lander Sends More Pictures — and We Know Where It Is

Four days after Intuitive Machines' Odysseus lander made an off-kilter touchdown on the moon, the…

19 hours ago

Astronomers Discover a New Meteor Shower. The Source is Comet 46P/Wirtanen

Like many of you, I love a good meteor shower. I have fond memories of…

1 day ago

Surprise! Japan’s SLIM Moon Lander Wakes Up After a Freezing Night

Japan's space agency didn't expect its wrong-side-up SLIM moon lander to revive itself after powering…

1 day ago