NASA’s X-Plane Program has been around for 70 years. Over the course of those decades, the agency has developed a series of airplanes and rockets to test out various technologies and design advances. Now NASA has cleared the newest one, the X-59, for final assembly.
The X-59 is a supersonic aircraft design. Its full name is the X-59 Quiet SuperSonic Technology (QueSST) aircraft. Rather than pushing for greater speeds or higher altitudes like some previous X-Plane’s, the X-59 is designed to break the sound barrier without the sonic boom. The X-59 will produce no more than a loud thump, if anything at all, when it passes the sound barrier.
Preliminary design for the X-59 began in February 2016. NASA wanted to develop a supersonic aircraft that eliminated the sonic boom. Supersonic aircraft have been around for a while, and have served as commercial airline aircraft. The Concorde was in service until 2003, but the tell-tale sonic boom that the Concorde created is problematic: the Concorde was only allowed on ocean-crossing flights as the noise was too much for populated areas.
But the speed of supersonic aircraft is hard to resist. Designers believed that the shape of an aircraft could be modified to eliminate the sonic boom, and bring supersonic aircraft back into service. One early test aircraft, the Northrop F5-E, had a specially-shaped nose that designers hoped would reduce or eliminate the sonic boom.
“This modification, which made the front of the F-5E somewhat resemble a pelican’s beak, was carefully shaped to change the pattern of shock waves it would generate while flying faster than the speed of sound,” said Lawrence R. Benson, the author of “Quieting the Boom,” a book about supersonic aircraft design.
The sonic boom that jets emit has nothing to do with the engine. The boom comes from shock waves that coalesce together in the wake of an aircraft when it breaches the sound barrier. And though it sounds to an individual observer like the boom is a single event, that’s not the case. The boom is continuous as long as the aircraft travels faster than the speed of sound.
The X-59 achieves its reduced noise level with the help of what are called “canards.” Canards are small fore-wings that sit ahead of the primary wings. They shape the shock waves and prevent them from coalescing behind the aircraft. Along with the long narrow air-frame of the X-59, the canards should reduce the noise from the aircraft to the equivalent of a car door closing.
One of the design concessions of the X-59 is that the cockpit has limited forward visibility. To get around this, the aircraft will have be equipped with the eXternal Visibility System (XVS.) The XVS is a system of sensors, computing, and display technologies that will overlay important flight information on cockpit displays, including visual aids for airport approaches, takeoffs, and landings. The result is a kind of “virtual reality” or augmented reality of the aircraft’s forward line of sight.
Now NASA has announced that the X-59 has passed the critical Key Decision Point-D (KPD-D), a kind of final review before assembly. Once the aircraft is ready for test flights, NASA officials will meet again in late 2020 to approve the airplane’s first flight in 2021.
“With the completion of KDP-D we’ve shown the project is on schedule, it’s well planned and on track. We have everything in place to continue this historic research mission for the nation’s air-traveling public,” said Bob Pearce, NASA’s associate administrator for Aeronautics, in a press release.
Once it’s flying, it will be tested rigorously with the help of civilian observers on the ground. It’ll be flown above selected communities in the US who will report their observations of the aircraft’s sound. This is to gauge the public’s perception of the aircraft, and to assist in developing new flight guidelines for future supersonic aircraft.
NASA has employed a unique method of visualizing the sound waves generated by supersonic aircraft. It’s called “Schlieren Photography” and it was first developed in 1864 to photograph the flow of fluids. NASA made great strides using it to image aircraft shock waves, and it’s been a key part of the development of the X-59.
The X-59 is being built by Lockheed-Martin at their Skunk Works facility in California. The aircraft is expected to cost about $250 million. By later 2020, final assembly should be complete.
- Press Release: NASA’s X-59 Quiet Supersonic Research Aircraft Cleared for Final Assembly
- Press Release: Testing of X-59 Virtual Forward Window Successful
- Universe Today: This is an Actual Photograph of the Shock Waves from Supersonic Jets Interacting with Each Other