The moons of Saturn, from left to right: Mimas, Enceladus, Tethys, Dione, Rhea; Titan in the background; Iapetus (top) and irregularly shaped Hyperion (bottom). Some small moons are also shown. All to scale. Credit: NASA/JPL/Space Science Institute
Continuing with our “Definitive Guide to Terraforming“, Universe Today is happy to present our guide to terraforming Saturn’s Moons. Beyond the inner Solar System and the Jovian Moons, Saturn has numerous satellites that could be transformed. But should they be?
Around the distant gas giant Saturn lies a system of rings and moons that is unrivaled in terms of beauty. Within this system, there is also enough resources that if humanity were to harness them – i.e. if the issues of transport and infrastructure could be addressed – we would be living in an age a post-scarcity. But on top of that, many of these moons might even be suited to terraforming, where they would be transformed to accommodate human settlers.
As with the case for terraforming Jupiter’s moons, or the terrestrial planets of Mars and Venus, doing so presents many advantages and challenges. At the same time, it presents many moral and ethical dilemmas. And between all of that, terraforming Saturn’s moons would require a massive commitment in time, energy and resources, not to mention reliance on some advanced technologies (some of which haven’t been invented yet).
Saturn's moon Tethys, imaged by Cassini on April 14, 2012.
Thanks the Voyager missions and the more recent flybys conducted by the Cassini space probe, Saturn’s system of moons have become a major source of interest for scientists and astronomers. From water ice and interior oceans, to some interesting surface features caused by impact craters and geological forces, Saturn’s moons have proven to be a treasure trove of discoveries.
This is particularly true of Saturn’s moon Tethys, also known as a “Death Star Moon” (because of the massive crater that marks its surface). In addition to closely resembling the space station out of Star Wars lore, it boasts the largest valleys in the Solar System and is composed mainly of water ice. In addition, it has much in common with two of its Cronian peers, Mimas and Rhea, which also resemble a certain moon-size space station.
Discovery and Naming:
Originally discovered by Giovanni Cassini in 1684, Tethys is one of four moons discovered by the great Italian mathematician, astronomer, astrologer and engineer between the years of 1671 and 1684. These include Rhea and Iapetus, which he discovered in 1671-72; and Dione, which he discovered alongside Tethys.
Cassini observed all of these moons using a large aerial telescope he set up on the grounds of the Paris Observatory. At the time of their discovery, he named the four new moons “Sider Lodoicea” (“the stars of Louis”) in honor of his patron, king Louis XIV of France.
An engraving of the Paris Observatory during Cassini’s time. Credit: Public Domain
Size, Mass and Orbit: With a mean radius of 531.1 ± 0.6 km and a mass of 6.1745 ×1020 kg, Tethys is equivalent in size to 0.083 Earths and 0.000103 times as massive. Its size and mass also mean that it is the 16th-largest moon in the Solar System, and more massive than all known moons smaller than itself combined. At an average distance (semi-major axis) of 294,619 km, Tethys is the third furthest large moon from Saturn and the 13th most distant moon over all.
Tethys’ has virtually no orbital eccentricity, but it does have an orbital inclination of about 1°. This means that the moon is locked in an inclination resonance with Saturn’s moon Mimas, though this does not cause any noticeable orbital eccentricity or tidal heating. Tethys has two co-orbital moons, Telesto and Calypso, which orbit near Tethys’s Lagrange Points.
Diameter comparison of the Saturnian moon Tethys, Moon, and Earth. Credit: NASA/JPL/USGS/Tom Reding
Tethys’ orbit lies deep inside the magnetosphere of Saturn, which means that the plasma co-rotating with the planet strikes the trailing hemisphere of the moon. Tethys is also subject to constant bombardment by the energetic particles (electrons and ions) present in the magnetosphere.
Composition and Surface Features: Tethys has a mean density of 0.984 ± 0.003 grams per cubic centimeter. Since water is 1 g/cm3, this means that Tethys is comprised almost entirely of water ice. In essence, if the moon were brought closer to the Sun, the vast majority of the moon would sublimate and evaporate away.
It is not currently known whether Tethys is differentiated into a rocky core and ice mantle. However, given the fact that rock accounts for less 6% of its mass, a differentiated Tethys would have a core that did not exceed 145 km in radius. On the other hand, Tethys’ shape – which resembles that of a triaxial ellipsoid – is consistent with it having a homogeneous interior (i.e. a mix of ice and rock).
This ice is also very reflective, which makes Tethys the second-brightest of the moons of Saturn, after Enceladus. There are two different regions of terrain on Tethys. One portion is ancient, with densely packed craters, while the other parts are darker and have less cratering. The surface is also marked by numerous large faults or graben.
The Odysseus Crater, the 400 km surface feature that gives Tethys it’s “Death Star” appearance. Credit: NASA/JPL/SSI
The western hemisphere of Tethys is dominated by a huge, shallow crater called Odysseus. At 400 km across, it is the largest crater on the surface, and roughly 2/5th the size of Tethys itself. Due to its position, shape, and the fact that a section in the middle is raised, this crater is also responsible for lending the moon it’s “Death Star” appearance.
The largest graben, Ithaca Chasma, is about 100 km wide and more than 2000 km long, making it the second longest valley in the Solar System. Named after the island of Ithaca in Greece, this valley runs approximately three-quarters of the way around Tethys’ circumference. It is also approximately concentric with Odysseus crater, which has led some astronomers to theorize that the two features might be related.
Scientists also think that Tethys was once internally active and that cryovolcanism led to endogenous resurfacing and surface renewal. This is due to the fact that a small part of the surface is covered by smooth plains, which are devoid of the craters and graben that cover much of the planet. The most likely explanation is that subsurface volcanoes deposited fresh material on the surface and smoothed out its features.
Cassini closeup of the southern end of Ithaca Chasma. Credit: NASA/JPL/Space Science Institute.
Like all other regular moons of Saturn, Tethys is believed to have formed from the Saturnian sub-nebula – a disk of gas and dust that surrounded Saturn soon after its formation. As this dust and gas coalesced, it formed Tethys and its two co-orbital moons: Telesto and Calypso. Hence why these two moons were captured into Tethys’ Lagrangian points, with one orbiting ahead of Tethys and the other following behind.
Exploration: Tethys has been approached by several space probes in the past, including Pioneer 11 (1979), Voyager 1 (1980) and Voyager 2 (1981). Although both Voyager spacecraft took images of the surface, only those taken by Voyager 2 were of high enough resolution to truly map the surface. While Voyager 1 managed to capture an image of Ithaca Chasma, it was the Voyager 2 mission that revealed much about the surface and imaged the Odysseus crater.
Tethys has also been photographed multiple times by the Cassini orbiter since 2004. By 2014, all of the images taken by Cassini allowed for a series of enhanced-color maps that detailed the surface of the entire planet (shown below). The color and brightness of Tethys’ surface have since become sources of interest to astronomers.
On the leading hemisphere of the moon, spacecraft have found a dark bluish band spanning 20° to the south and north from the equator. The band has an elliptical shape getting narrower as it approaches the trailing hemisphere, which is similar to the one found on Mimas.
Global, color mosaics of Saturn’s moon Tethys, as produced from images taken by NASA’s Cassini spacecraft between 2004-2014. Credit: NASA/JPL-Caltech/Space Science Institute/ Lunar and Planetary Institute
The band is likely caused by the influence of energetic electrons from Saturn’s magnetosphere, which drift in the direction opposite to the rotation of the planet and impact areas on the leading hemisphere close to the equator. Temperature maps of Tethys obtained by Cassini have shown this bluish region to be cooler at midday than surrounding areas.
At present, Tethys’ water-rich composition remains unexplained. One of the most interesting explanations proposed is that the rings and inner moons accreted from the ice-rich crust of a much larger, Titan-sized moon before it was swallowed up by Saturn. This, and other mysteries, will likely be addressed by future space probe missions.
We have many great articles about Tethys here at Universe Today. Here’s one about the story about Tethys, with a photograph taken by NASA’s Cassini spacecraft, and another about a feature on the surface of Tethys called Ithaca Chasma.
Want more info on Tethys? Check out this article from Solar Views, and this one from Nine Planets.
Saturn's moon Rhea, as imaged by the Cassini-Huygens spaceprobe. Credit: NASA/JPL-Caltech
The Cronian system (i.e. Saturn and its system of rings and moons) is breathtaking to behold and intriguing to study. Besides its vast and beautiful ring system, it also has the second-most satellites of any planet in the Solar System. In fact, Saturn has an estimated 150 moons and moonlets – and only 53 of them have been officially named – which makes it second only to Jupiter.
For the most part, these moons are small, icy bodies that are believed to house interior oceans. And in all cases, particularly Rhea, their interesting appearances and compositions make them a prime target for scientific research. In addition to being able to tell us much about the Cronian system and its formation, moons like Rhea can also tell us much about the history of our Solar System.
Discovery and Naming:
Rhea was discovered by Italian astronomer Giovanni Domenico Cassini on December 23rd, 1672. Together with the moons of Iapetus, Tethys and Dione, which he discovered between 1671 and 1672, he named them all Sidera Lodoicea (“the stars of Louis”) in honor of his patron, King Louis XIV of France. However, these names were not widely recognized outside of France.
In 1847, John Herschel (the son of famed astronomer William Herschel, who discovered Uranus, Enceladus and Mimas) suggested the name Rhea – which first appeared in his treatise Results of Astronomical Observations made at the Cape of Good Hope. Like all the other Cronian satellites, Rhea was named after a Titan from Greek mythology, the “mother of the gods” and one the sisters of Cronos (Saturn, in Roman mythology).
The moons of Saturn, from left to right: Mimas, Enceladus, Tethys, Dione, Rhea; Titan (background), Iapetus (top), and Hyperion (bottom). Credit: NASA/JPL/Space Science Institute
Size, Mass and Orbit:
With a mean radius of 763.8±1.0 km and a mass of 2.3065 ×1021 kg, Rhea is equivalent in size to 0.1199 Earths (and 0.44 Moons), and about 0.00039 times as massive (or 0.03139 Moons). It orbits Saturn at an average distance (semi-major axis) of 527,108 km, which places it outside the orbits of Dione and Tethys, and has a nearly circular orbit with a very minor eccentricity (0.001).
With an orbital velocity of about 30,541 km/h, Rhea takes approximately 4.518 days to complete a single orbit of its parent planet. Like many of Saturn’s moons, its rotational period is synchronous with its orbit, meaning that the same face is always pointed towards it.
Composition and Surface Features:
With a mean density of about 1.236 g/cm³, Rhea is estimated to be composed of 75% water ice (with a density of roughly 0.93 g/cm³) and 25% of silicate rock (with a density of around 3.25 g/cm³). This low density means that although Rhea is the ninth-largest moon in the Solar System, it is also the tenth-most massive.
In terms of its interior, Rhea was originally suspected of being differentiated between a rocky core and an icy mantle. However, more recent measurements would seem to indicate that Rhea is either only partly differentiated, or has a homogeneous interior – likely consisting of both silicate rock and ice together (similar to Jupiter’s moon Callisto).
Views of Saturn’s moon Rhea, with false-color image showing elevation data at the right. Credit: NASA/JPL/Space Science Institute
Models of Rhea’s interior also suggest that it may have an internal liquid-water ocean, similar to Enceladus and Titan. This liquid-water ocean, should it exist, would likely be located at the core-mantle boundary, and would be sustained by the heating caused by from decay of radioactive elements in its core.
Rhea’s surface features resemble those of Dione, with dissimilar appearances existing between their leading and trailing hemispheres – which suggests that the two moons have similar compositions and histories. Images taken of the surface have led astronomers to divide it into two regions – the heavily cratered and bright terrain, where craters are larger than 40 km (25 miles) in diameter; and the polar and equatorial regions where craters are noticeably smaller.
Another difference between Rhea’s leading and trailing hemisphere is their coloration. The leading hemisphere is heavily cratered and uniformly bright while the trailing hemisphere has networks of bright swaths on a dark background and few visible craters. It had been thought that these bright areas (aka. wispy terrain) might be material ejected from ice volcanoes early in Rhea’s history when its interior was still liquid.
However, observations of Dione, which has an even darker trailing hemisphere and similar but more prominent bright streaks, has cast this into doubt. It is now believed that the wispy terrain are tectonically-formed ice cliffs (chasmata) which resulted from extensive fracturing of the moon’s surface. Rhea also has a very faint “line” of material at its equator which was thought to be deposited by material deorbiting from its rings (see below).
Hemispheric color differences on Saturn’s moon Rhea are apparent in this false-color view of the anti-Cronian side, from NASA’s Cassini spacecraft. Image Credit: NASA/JPL/SSI
Rhea has two particularly large impact basins, both of which are situated on Rhea’s anti-Cronian side (aka. the side facing away from Saturn). These are known as Tirawa and Mamaldi basins, which measure roughly 360 and 500 km (223.69 and 310.68 mi) across. The more northerly and less degraded basin of Tirawa overlaps Mamaldi – which lies to its southwest – and is roughly comparable to the Odysseus crater on Tethys (which gives it its “Death-Star” appearance).
Atmosphere:
Rhea has a tenuous atmosphere (exosphere) which consists of oxygen and carbon dioxide, which exists in a 5:2 ratio. The surface density of the exosphere is from 105 to 106 molecules per cubic centimeter, depending on local temperature. Surface temperatures on Rhea average 99 K (-174 °C/-281.2 °F) in direct sunlight, and between 73 K (-200 °C/-328 °F) and 53 K (-220 °C/-364 °F) when sunlight is absent.
The oxygen in the atmosphere is created by the interaction of surface water ice and ions supplied from Saturn’s magnetosphere (aka. radiolysis). These ions cause the water ice to break down into oxygen gas (O²) and elemental hydrogen (H), the former of which is retained while the latter escapes into space. The source of the carbon dioxide is less clear, and could be either the result of organics in the surface ice being oxidized, or from outgassing from the moon’s interior.
Saturn’s second-largest moon Rhea, pictured by the Cassini probe on March 29, 2012. Credit: NASA/JPL
Rhea may also have a tenuous ring system, which was inferred based on observed changes in the flow of electrons trapped by Saturn’s magnetic field. The existence of a ring system was temporarily bolstered by the discovered presence of a set of small ultraviolet-bright spots distributed along Rhea’s equator (which were interpreted as the impact points of deorbiting ring material).
However, more recent observations made by the Cassini probe have cast doubt on this. After taking images of the planet from multiple angles, no evidence of ring material was found, suggesting that there must be another cause for the observed electron flow and UV bright spots on Rhea’s equator. If such a ring system were to exist, it would be the first instance where a ring system was found orbiting a moon.
Exploration:
The first images of Rhea were obtained by the Voyager 1 and 2 spacecraft while they studied the Cronian system, in 1980 and 1981, respectively. No subsequent missions were made until the arrival of the Cassini orbiter in 2005. After it’s arrival in the Cronian system, the orbiter made five close targeted fly-bys and took many images of Saturn from long to moderate distances.
The Cronian system is definitely a fascinating place, and we’ve really only begun to scratch its surface in recent years. In time, more orbiters and perhaps landers will be traveling to the system, seeking to learn more about Saturn’s moons and what exists beneath their icy surfaces. One can only hope that any such mission includes a closer look at Rhea, and the other “Death Star Moon”, Dione.
When Voyager first imaged the huge Herschel Crater on Mimas, scientists could not help comparing the small and battered moon to the Death Star in George Lucas’ science-fiction adventure Star Wars. But Saturn’s moon Tethys is also home to a massive crater; the remains of an ancient impact that nearly destroyed the tiny moon. Odysseus Crater dominates the surface of Tethys covering two-thirds of the surface. The tiny moon is just 1062 kilometers, or 660 miles, across. Using information from Voyager and Cassini, scientists found that the heavily cratered and fractured moon is made up of mostly water ice with a small amount of rock.
Odysseus Crater takes up the entire left side of this image.
With the Sun over Cassini’s shoulder, the spacecraft took this image of the northern part of Odysseus June 28, 2012 while the spacecraft zipped along just 72,000 kilometers (45,000 miles) above Tethys. If you’re interested, the resolution of this image is about 430 meters (1,409 feet) per pixel; meaning that one pixel takes up 430 meters in the image.
John Williams is a science writer and owner of TerraZoom, a Colorado-based web development shop specializing in web mapping and online image zooms. He also writes the award-winning blog, StarryCritters, an interactive site devoted to looking at images from NASA’s Great Observatories and other sources in a different way. A former contributing editor for Final Frontier, his work has appeared in the Planetary Society Blog, Air & Space Smithsonian, Astronomy, Earth, MX Developer’s Journal, The Kansas City Star and many other newspapers and magazines.
