Swarms of Robots Could Dig Underground Cities on Mars

Underground habitats have recently become a focal point of off-planet colonization efforts.  Protection from micrometeorites, radiation, and other potential hazards makes underground sites desirable compared to surface dwellings. Building such subterranean structures presents a plethora of challenges, not the least of which is how to actually construct them.  A team of researchers at the Delft University of Technology (TUD) is working on a plan to excavate material and then use it to print habitats.  All that would be done with a group of swarming robots.

The idea stems from a grant opportunity posted by the European Space Agency.  Students at the Robotic Building lab (RB) at TU Delft, led by Dr. Henriette Bier, were enthusiastic to participate in the challenge that focuses on in-situ resource utilization for off-Earth construction.  The RB team, together with experts in material science, robotics, and aerospace engineering submitted an idea that was granted €100k by the European Space Agency (ESA) to develop a preliminary proof of concept. 

The proposed approach focuses on the lab’s specialty – robotic building – and has four main components – digging out the regolith, printing a new habitat using an additive manufacturing process, coordinating the work between all the robots that would be needed to complete the tasks, and powering them as well as the habitat.

Excavating regolith with robots has been explored previously, but usually in the context of the moon.  Different patterns of excavation are useful for building different structures, and the pattern the RB team focused on was a downwards sloping spiral.  Such a structure could create a stable, safe structure within a relatively small footprint on the surface.

Example of some of the subtractive toolpaths that would be use to hollow out the habitat's tunnels.
Example of some of the subtractive toolpaths that would be use to hollow out the habitat’s tunnels.
Credit: Bier et al.

Modeling the stresses and strains on that structure is a key component of the current study project.  The team developed a 1m x 1m scale prototype of a fragment with patterns that would allow them to create safe and stable areas effectively.  Some of those areas were designed with habitation in mind, including detachable plant areas that could house hydroponically grown plants. 

Tons upon tons of regolith would have to be removed from any real-life scale excavation site.  That regolith is used as material to 3D print a stable habitat.  Originally, the team was planning on combining regolith with liquid Sulphur to produce concrete.  But after involving material scientists and an industrial partner specialized in robotic printing with cement they settled on using cement-based concrete by tapping into some of Mars’ water resources.  Creating cement itself requires an infrastructure though, so any such plan to utilize regolith would have to wait until after that infrastructure was already in place on the planet.

Video discussing how swarm methodology can be implemented to aid in the exploration of Mars.

Structuring the habitat itself is also a key consideration when designing what shape should be 3D printed.  The team focused on relatively porous structures, which allowed them to use less material in its construction. However, the structures still had remarkably high strength and durability and also provided good insulation from the radiation and micrometeorite impacts the subsurface colony is looking to avoid.

Some of the advantages of this approach are due to one of the biggest drivers of innovation – collaboration.  The project is coordinated by the RB lab but involves partners both at TUD and external commercial partners.  These collaborators bring civil, aerospace, and robotic engineering expertise, and additive manufacturing technologies for developing the robotic swarm construction approach . 

An example of the "rhizome" habitat that would have a relatively small exposed area on the surface but provide a large habitable space underground.
An example of the “rhizome” habitat that would have a relatively small exposed area on the surface but provide a large habitable space underground.
Credit: Bier et al.

Those collaborators will have to continue to work together for a long time in order to see this project eventually implemented on Mars.  As a technology demonstrator, it still has a long way to go to even be accepted as a mission concept.  Dr. Bier and her team hope to continue pushing the concept forward and are shooting for future funding opportunities as part of that development path.

With luck, swarming robots and 3D printed cement-based habitats will play a key role in the future development of what so far is only science fiction – an underground city on Mars.

Learn More:
arXiv – Design-to-Robotic-Production of Underground Habitats on Mars
ESA – Implemented OSIP ideas — December 2020
UT – This Martian Lava Tube Skylight is 50 Meters Across. The Biggest Lava Tube on Earth is Only 15 Meters Across
UT – Underground Liquid Water Found on Mars!

Lead Image:
Concept of a underground habitat and the robots and energy sources that will build and power it.
Credit – Bier et al.