Finally! SpaceX Starship Prototype SN5 Flies Just Over 150 Meters Into the Air

Credit: SpaceX

Yesterday (on Tuesday, August 4th), ground crews at the SpaceX launch facility in Boca Chica, Texas, accomplished a major milestone. After 11 months of prototyping, testing, and more than a few explosions, the fifth Starship prototype (SN5) successfully completed a 150 meter (~500 ft) hop test and landed safely again. This latest test puts SpaceX on track towards full-scale orbital testing of their future launch vehicle.

Continue reading “Finally! SpaceX Starship Prototype SN5 Flies Just Over 150 Meters Into the Air”

Will We See a Starship Test This Week?

Credit: LabPadre

As we speak, engineers at SpaceX’s Boca Chica test facility are busy getting the fifth Starship prototype (SN5) ready. Having recently passed the crucial cryogenic load test, and with the installation of its SN27 Raptor engine, the ground crews are now gearing up for a static fire test. Assuming the SN5 doesn’t explode in a massive fireball (as the SN4 did), it will be ready to make the first hop test of a full-scale Starship prototype.

Continue reading “Will We See a Starship Test This Week?”

The SpaceX Starship Could Fly This Summer!

Credit: Elon Musk

SpaceX is really coming along with its development of the Starship and Super Heavy launch system. After repeated delays caused by structural failures (aka. explosions), the company got back on track late in April when their fourth prototype (SN4) passed the crucial cryogenic load test. This was followed by a successful static fire test on May 4th, followed by a second static fire test the next day.

And, after being scrubbed three times since last Friday (May 15th), SpaceX conducted the third static fire test with the SN4 on Tuesday, May 19th. Unfortunately, an unexpected fire near the base of the rocket caused the prototype to get a bit scorched and caused some internal damage. However, the prototype survived and is back in working order, which means SpaceX is moving ahead with more tests in preparation for a full-scale launch.

Continue reading “The SpaceX Starship Could Fly This Summer!”

SpaceX’s Third Starship Prototype Collapsed Last Night

Credit: LabPadre/Maria Pointer

Top Image Credit: LabPadre w/ Maria Pointer

SpaceX just cannot catch a break! Last night, during the same cryogenic proof test that killed the previous two prototypes, SpaceX’s SN3 prototype experienced a structural failure. On-site video footage provided by famed NASASpaceFlight member BocaChicaGal shows the SN3 experiencing what appears to be a leak, followed by the fuselage collapsing.

Continue reading “SpaceX’s Third Starship Prototype Collapsed Last Night”

Another Reminder that Spaceflight is Difficult. Starship Prototype Explodes and Falls Over

The assembled Mk. 1 picture at night. Credit: SpaceX

SpaceX’s Starship has been hitting some bumps making its way from the drawing board to space. As the spacecraft element of the Elon Musk’s proposed super-heavy launch system, the Starship will one day become the workhorse of SpaceX, replacing the Falcon 9 and Falcon Heavy launchers. Unfortunately, another Starship prototype recently experienced a structural failure during pressure testing that caused it to explode.

Continue reading “Another Reminder that Spaceflight is Difficult. Starship Prototype Explodes and Falls Over”

SpaceX Has Requested Permission to Fly Starship as Early as March

Credit: SpaceX

In September of 2019, SpaceX unveiled the first Starship prototype, the first of several test vehicles that would validate the design of the next-generation spacecraft that would fulfill Musk’s promise of making commercial flights to the Moon and Mars. And while there was a bit of a setback in November of 2019 after the Mk. 1 suffered a structural failure, Musk indicated that the company would be moving forward with other prototypes.

As Musk explained at the time, this would consist of the Mk. 3 prototype conducting an orbital test flight to an altitude of 100 km (62 mi) sometime in 2020. According to recent filings made with the FCC, this test could be happening as early as mid-March and will involve the vehicle launching from the company’s test facility in Boca Chica, Texas, and flying to an altitude of 20 km (12.6 mi) before landing.

Continue reading “SpaceX Has Requested Permission to Fly Starship as Early as March”

Starship Mk 1 Blows its Top During Testing

The assembled Mk. 1 picture at night. Credit: SpaceX

SpaceX has been on a roll lately. With the completion of tethered and untethered flight tests with the Starship Hopper, SpaceX founder Elon Musk unveiled the newly-completed Starship Mk 1 prototype and announced that orbital test flights would commence in a few months. Meanwhile, the Starlink constellation got started with the launch of its first 60 satellites, followed by 60 more upgraded versions.

Unfortunately, there are always some speed bumps along the way. Yesterday, during a cryogenic loading test, the Starship Mk 1 experienced an explosion that sent its top bulkhead flying off and dispersing frozen vapor all over the launch area. However, SpaceX has indicated in an official statement that this setback was not unforeseen and won’t hamper the orbital flight test of the prototype for long.

Continue reading “Starship Mk 1 Blows its Top During Testing”

SpaceX Starship Gets Some Fins

Credit: SpaceX

Earlier today, Elon Musk posted another update via Twitter on the progress of the Starship prototype. Images taken from the company’s South Texas Launch Site near the town of Boca Chica show the Starship Mk.1 being equipped with two new tail fins. According to the usual Q&A that accompanied one of Musk’s post, these fins are intended to stabilize the Mk.1 during takeoff and landing.

Continue reading “SpaceX Starship Gets Some Fins”