Matt Williams is a space journalist and science communicator for Universe Today and Interesting Engineering. He's also a science fiction author, podcaster (Stories from Space), and Taekwon-Do instructor who lives on Vancouver Island with his wife and family.
Jupiter is known as the “King of the Planets”, and for good reason. For one, it is the largest planet in the Solar System, and is actually more massive than all the other planets combined. Fittingly, it is named after the king of the Roman pantheon, the latinized version of Zeus (the king of the Olympian gods).
Compare that to Earth, which is the largest of the terrestrial planets, but a tiny marble when compared to the Jovian giant. Because their disparity in size, people often wonder many times over Earth could be squeezed in Jupiter’s massive frame. As it turns out, you could it do many, many times over!
Size and Mass Comparison:
To break the whole size discrepancy down, Jupiter has a mean radius of 69,911 ± 6 km (60217.7 ± 3.7 mi). As already noted, this is roughly 2.5 times the mass of all the planets in the Solar System combined. Compared this to Earth’s mean radius of 6,371.0 km (3,958.8 mi), and you could say that Earth fits into Jupiter almost 11 times over (10.97 to be exact).
Rough visual comparison of Jupiter, Earth, and the Great Red Spot. Approximate scale is 44 km/px. Credit: NASA/Brian0918/ Wikipedia Commons
And as already noted, Jupiter is more massive than all the other planets in our Solar System – 2.5 times as massive, that is. In fact, Jupiter weighs in at a hefty 1.8986 × 1027 kg (~4.1857 x 1027 lbs), or 1898.6 billion trillion metric tons (2.092 billion trillion US tons).
Compare that to Earth, which has a mass of 5.97 × 1024 kg (13.1668 × 1024 lb) – 5.97 billion trillion metric tons, or 6.5834 billion trillion US tons. Doing the math, we then come to the conclusion that Jupiter is approximately 317.8 times as massive as Earth.
Volume Comparison:
However, figuring for radius is only useful is you are planning on stacking the Earths end to end across the middle of the gas giant. And comparing their masses doesn’t give you a sense of size, seeing as how the planets are widely different in terms of their density.
To know how many Earth’s could truly fit inside in three-dimensions, you have to consider total volume, which you can calculate using the simple formula of 4/3 x Pi x radius2.
Doing the math, we find that Jupiter has a volume of 1.43 x 1015 km³ (1,430 trillion cubic km; 343 trillion cubic mi) while Earth has a volume of 1.08 trillion km3 (259 million mi). Divide the one by the other, and you get a value of 1299, meaning you could fit almost 1300 Earth’s inside Jupiter.
In short, the king of the planets is much, much, MUCH bigger than the planet we call home. Someday, if we ever hope to live around Jupiter (i.e. colonize its moons), we will be able to appreciate just how big it is up close. Until then, these impressive figures will have to suffice!
The symbols of the eight planets, and Pluto, Credit: insightastrology.net
In our long history of staring up at the stars, human beings have assigned various qualities, names, and symbols for all the objects they have found there. Determined to find patterns in the heavens that might shed light on life here on Earth, many of these designations ascribed behavior to the celestial bodies.
When it comes to assigning signs to the planets, astrologists and astronomers – which were entwined disciplines in the past -made sure that these particular symbols were linked to the planets’ names or their history in some way.
Consider the planet Mercury, named after the Roman god who was himself the messenger of the gods, noted for his speed and swiftness. The name was assigned to this body largely because it is the planet closest to the Sun, and which therefore has the fastest rotation period. Hence, the symbol is meant to represent Mercury’s helmet and caduceus – a herald’s staff with snakes and wings intertwined.
Mercury, as imaged by the MESSENGER spacecraft, which was named after the messenger of the gods because it has the fastest orbit around the Sun. Image Credit: NASA/JHU/Carnegie Institution.
Venus:
Venus’ symbol has more than one meaning. Not only is it the sign for “female”, but it also represents the goddess Venus’ hand mirror. This representation of femininity makes sense considering Venus was the goddess of love and beauty. The symbol is also the chemical sign for copper; since copper was used to make mirrors in ancient times.
Earth:
Earth’s sign also has a variety of meanings, although it does not refer to a mythological god. The most popular view is that the circle with a cross in the middle represents the four main compass points. It has also been interpreted as the Globus Cruciger, an old Christian symbol for Christ’s reign on Earth.
This symbol is not just limited to Christianity though, and has been used in various culture around the world. These include, but are not limited to, Norse mythology (where it appears as the Solar or Odin’s Cross), Native American cultures (where it typically represented the four spirits of direction and the four sacred elements), the Celtic Cross, the Greek Cross, and the Egyptian Ankh.
In fact, perhaps owing to the simplicity of the design, cross-shaped incisions have made appearances as petroglyphs in European cult caves dating all the way back to the beginning of the Upper Paleolithic, and throughout prehistory to the Iron Age.
Mars, as photographed with the Mars Global Surveyor, is identified with the Roman god of war. Credit: NASA
Mars:
Mars is named after the Roman god of war, owing perhaps to the planet’s reddish hue, which gives it the color of blood. For this reason, the symbol associated with Mars represents the god of wars’ shield and spear. Additionally, it is the same sign as the one used to represent “male”, and hence is associated with self-assertion, aggression, sexuality, energy, strength, ambition and impulsiveness.
Jupiter:
Jupiter’s sign, which looks like an ornate, oddly shaped “four,” also stands for a number of symbols. It has been said to represent an eagle, which is Jupiter’s bird. Additionally, the symbol can stand for a “Z,” which is the first letter of Zeus – who was Jupiter’s Greek counterpart.
The line through the symbol is consistent with this, since it would indicate that it was an abbreviation for Zeus’ name. And last, but not least, there is the addition of the swirled line which is believed to represent a lighting bolt – which just happens to Jupiter’s (and Zeus’) weapon of choice.
Saturn:
Like Jupiter, Saturn resembles another recognizable character – this time, it’s an “h.” However, this symbol is actually supposed to represent Saturn’s scythe or sickle, because Saturn is named after the Roman god of agriculture.
Jupiter, the largest planet in the Solar System, is appropriately named after the Roman father of the gods. Credit: NASA/ESA/A. Simon (Goddard Space Flight Center)
Uranus:
The sign for Uranus is a combination of two other signs – Mars’ sign and the symbol of the Sun – because the planet is connected to these two in mythology. Uranus represented heaven in Roman mythology, and this ancient civilization believed that the Sun’s light and Mars’ power ruled the heavens.
Neptune:
Neptune’s sign is linked to the sea god Neptune, who the planet was named after. Appropriately, the symbol represents this planet is in the shape of the sea god’s trident.
Pluto:
Although Pluto was demoted to a dwarf planet, it still has a symbol. Pluto’s sign is a combination of a “P” and a “L,” which are the first two letters in Pluto as well as the initials of Percival Lowell, the astronomer who discovered the planet.
Other Objects:
The Moon is represented by a crescent shape, which is a clear allusion to how the Moon appears in the night sky more often than not. Since the Moon is also tied to people’s perceptions, moods, and emotional make-up, the symbol has also come to represents the mind’s receptivity.
A full moon captured July 18, 2008. Credit: NASA/Sean Smith
And then there’s the sun, which is represented by a circle with a dot in the middle. In the case of the Sun, this symbol represents the divine spirit (circle) surrounding the seed of potential, which is a direct association with ancient Sun worship and the central role Sun god’s played in ancient pantheons.
The planets have played an important role in the culture and astrological systems of every human culture. Because of this, the symbols, names, and terms that denote them continue to hold special significance in our hearts and minds.
Artist's impression of The Milky Way Galaxy. Based on current estimates and exoplanet data, it is believed that there could be tens of billions of habitable planets out there. Credit: NASA
When you look up into the night sky, it seems like you can see a lot of stars. There are about 2,500 stars visible to the naked eye at any one point in time on the Earth, and 5,800-8,000 total visible stars (i.e. that can be spotted with the aid of binoculars or a telescope). But this is a very tiny fraction of the stars the Milky Way is thought to have!
So the question is, then, exactly how many stars are in the Milky Way Galaxy? Astronomers estimate that there are 100 billion to 400 billion stars contained within our galaxy, though some estimate claim there may be as many as a trillion. The reason for the disparity is because we have a hard time viewing the galaxy, and there’s only so many stars we can be sure are there.
Structure of the Milky Way:
Why can we only see so few of these stars? Well, for starters, our Solar System is located within the disk of the Milky Way, which is a barred spiral galaxy approximately 100,000 light years across. In addition, we are about 30,000 light years from the galactic center, which means there is a lot of distance – and a LOT of stars – between us and the other side of the galaxy.
Artist’s impression of the Milky Way Galaxy. Credit: NASA
To complicate matter further, when astronomers look out at all of these stars, even closer ones that are relatively bright can be washed out by the light of brighter stars behind them. And then there are the faint stars that are at a significant distance from us, but which elude conventional detection because their light source is drowned out by brighter stars or star clusters in their vicinity.
The furthest stars that you can see with your naked eye (with a couple of exceptions) are about 1000 light years away. There are quite a few bright stars in the Milky Way, but clouds of dust and gas – especially those that lie at the galactic center – block visible light. This cloud, which appears as a dim glowing band arching across the night sky – is where our galaxy gets the “milky” in its name from.
It is also the reason why we can only really see the stars in our vicinity, and why those on the other side of the galaxy are hidden from us. To put it all in perspective, imagine you are standing in a very large, very crowded room, and are stuck in the far corner. If someone were to ask you, “how many people are there in here?”, you would have a hard time giving them an accurate figure.
Now imagine that someone brings in a smoke machine and begins filling the center of the room with a thick haze. Not only does it become difficult to see clearly more than a few meters in front of you, but objects on the other side of the room are entirely obscured. Basically, your inability to rise above the crowd and count heads means that you are stuck either making guesses, or estimating based on those that you can see.
A mosaic of the images covering the entire sky as observed by the Wide-field Infrared Survey Explorer (WISE), part of its All-Sky Data Release. Credit: NASA/JPL
Imaging Methods:
Infrared (heat-sensitive) cameras like the Cosmic Background Explorer (aka. COBE) can see through the gas and dust because infrared light travels through it. And there’s also the Spitzer Space Telescope, an infrared space observatory launched by NASA in 2003; the Wide-field Infrared Survey Explorer (WISE), deployed in 2009; and the Herschel Space Observatory, a European Space Agency mission with important NASA participation.
All of these telescopes have been deployed over the past few years for the purpose of examining the universe in the infrared wavelength, so that astronomers will be able to detect stars that might have otherwise gone unnoticed. To give you a sense of what this might look like, check out the infrared image below, which was taken by COBE on Jan. 30th, 2000.
However, given that we still can’t seem them all, astronomers are forced to calculate the likely number of stars in the Milky Way based on a number of observable phenomena. They begin by observing the orbit of stars in the Milky Way’s disk to obtain the orbital velocity and rotational period of the Milky Way itself.
Estimates:
From what they have observed, astronomers have estimated that the galaxy’s rotational period (i.e. how long it takes to complete a single rotation) is apparently 225-250 million years at the position of the Sun. This means that the Milky Way as a whole is moving at a velocity of approximately 600 km per second, with respect to extragalactic frames of reference.
Infrared image of the Milky Way taken by NASA’s Spitzer Space Telescope. Credit: NASA/JPL-Caltech
Then, after determining the mass (and subtracting out the halo of dark matter that makes up over 90% of the mass of the Milky Way), astronomers use surveys of the masses and types of stars in the galaxy to come up with an average mass. From all of this, they have obtained the estimate of 200-400 billion stars, though (as stated already) some believe there’s more.
Someday, our imaging techniques may become sophisticated enough that are able to spot every single star through the dust and particles that permeate our galaxy. Or perhaps will be able to send out space probes that will be able to take pictures of the Milky Way from Galactic north – i.e. the spot directly above the center of the Milky Way.
Until that time, estimates and a great deal of math are our only recourse for knowing exactly how crowded our local neighborhood is!
We have written many great articles on the Milky Way here at Universe Today. For example, here are 10 Facts About the Milky Way, as well as articles that answer other important questions.
Astronomy Cast did a podcast all about the Milky Way, and the Students for the Exploration and Development of Space (SEDS) have plenty of information about the Milky Way here.
And if you’re up for counting a few of the stars, check out this mosaic from NASA’s Astronomy Picture of the Day. For a more in-depth explanation on the subject, go to How the Milky Way Galaxy Works.
The moon in its waning gibbous phase on Sept. 12, 2014. Photo taken with a Canon 700D attached to a Maksutov 127mm telescope. Credit: Sarah&Simon Fisher
Human beings have been observing the Moon for as long as they have walked the Earth. Throughout recorded and pre-recorded history, they have paid close attention to its phases and accorded them particular significance. This has played a major role in shaping the mythological and astrological traditions of every known culture.
With the birth of astronomy as a scientific discipline, how the Moon appears in the night sky (and sometimes during the day) has also gone long way towards helping us to understand how our Solar System works. It all comes down to the Lunar Cycle, the two key parts of this cycle involve the “waxing and waning” of the Moon. But what exactly does this mean?-day
Lunar Cycle:
First, we need to consider the orbital parameters of the Earth’s only satellite. For starters, since the Moon orbits Earth, and Earth orbits the Sun, the Moon is always half illuminated by the latter. But from our perspective here on Earth, which part of the Moon is illuminated – and the amount to which it is illuminated – changes over time.
When the Sun, the Moon and Earth are perfectly lined up, the angle between the Sun and the Moon is 0-degrees. At this point, the side of the Moon facing the Sun is fully illuminated, and the side facing the Earth is enshrouded in darkness. We call this a New Moon.
After this, the phase of the Moon changes, because the angle between the Moon and the Sun is increasing from our perspective. A week after a New Moon, and the Moon and Sun are separated by 90-degrees, which effects what we will see. And then, when the Moon and Sun are on opposite sides of the Earth, they’re at 180-degrees – which corresponds to a Full Moon.
Waxing vs. Waning:
The period in which a Moon will go from a New Moon to a Full Moon and back again is known as “Lunar Month”. One of these lasts 28 days, and encompasses what are known as “waxing” and “waning” Moons. During the former period, the Moon brightens and its angle relative to the Sun and Earth increases.
Synthetic view of the waxing Moon as viewed from Earth on 2013-10-15 17:00:00 UTC. Credit: NASA/GSFC/Arizona State UniversityWhen the Moon starts to decrease its angle again, going from 180-degrees back down to 0-degrees, astronomers say that it’s a waning moon. In other words, when the Moon is waning, it will have less and less illumination every night until it’s a New Moon.
Waning Phases:
When the Moon is no longer full, but it hasn’t reached a quarter moon – i.e. when it’s half illuminated from our perspective – we say that it’s a Waning Gibbous Moon. This is the exact reverse of a Waxing Gibbous Moon, when the Moon is increasing in brightness from a New Moon to a Full Moon.
This is followed by a Third Quarter (or last quarter) Moon. During this period, 50% of the Moon’s disc will be illuminated (left side in the northern hemisphere, and the right in the southern), which is the opposite of how it would appear during a First Quarter. These phases are often referred to as a “Half Moon”, since half the disc is illuminated at the time.
The moon in its waning gibbous phase on Sept. 12, 2014. Photo taken with a Canon 700D attached to a Maksutov 127mm telescope. Credit: Sarah&Simon Fisher
Finally, a Waning Crescent is when the Moon appears as a sliver in the night sky, where between 49–1% of one side is illuminated after a Full Moon (again, left in the northern hemisphere, right in the southern). This is the opposite of a Waxing Crescent, when 1-49% of the other wide is illuminated before it reaches a Full Moon.
Even today, thousands of years later, human beings still look up at the Moon and are inspired by what they see. Not only have we explored Earth’s only satellite with robotic missions, but even crewed missions have been there and taken samples directly from the surface. And yet, it still possesses enough mystery to keep us inspired and guessing.
Uranus as seen through the automated eyes of Voyager 2 in 1986. (Credit: NASA/JPL).
The gas (and ice) giant known as Uranus is a fascinating place. The seventh planet from out Sun, Uranus is the third-largest in terms of size, the fourth-largest in terms of mass, and one of the least dense objects in our Solar System. And interestingly enough, it is the only planet in the Solar System that takes it name from Greek (rather than Roman) mythology.
But these basic facts really only begin to scratch the surface. When you get right down to it, Uranus is chock full of interesting and surprising details – from its many moons, to its ring system, and the composition of its aqua atmosphere. Here are just ten things about this gas/ice giant, and we guarantee that at least one of them will surprise you.
This Galielo image shows Jupiter's moon Ganymede in enhanced colour. The JWST aimed its instruments at our Solar System's largest moon to study its surface. Credit: NASA
Many people think that the answer to ‘what is the largest moon in the Solar System’ is our Moon. It is not. Our Moon is the fifth largest natural satellite. Ganymede, a moon of Jupiter, is the largest in this solar system. At 5,268 km at the equator, it is larger than Mercury, the dwarf planet Pluto, and three times larger than the Moon orbiting Earth. According to information from NASA,if Ganymede were to break free of Jupiter’s gravitational pull it would be classified as a planet.
Ganymede has an iron-metallic core that generates a magnetic field. The core is surrounded by a mantle of rock, which is, in turn, covered by a thick shell of ice and rock. The outer shell is up to 800 km thick. On top of the outer shell is a thin layer of material(accreted?) that is a mixture of ice and rock. In images taken by the Hubble Space Telescope in 1996, astronomers discovered a tenuous atmosphere of oxygen. The atmosphere would not support known life forms, but its very existence is interesting to science.
Through spacecraft observation, there are several facts known about the surface of Ganymede. Its surface shows two types of terrain. Forty percent of the surface is covered with highly cratered dark regions, while the remainder is covered by light grooved terrain. The light grooving forms intricate patterns across surface of the moon, some of which are thousands of km long. Sulcus, a term that means a groove or burrow, is often used to describe the grooving. This portion of the terrain was most likely formed by tensional faulting or the release of water from beneath the surface. Ridges as high as 700 m have been observed. The dark regions are heavily cratered, old and rough, and are believed to be the original crust of the moon.
Ganymede was discovered by Galileo on January 7, 1610. He made the discovery, along with three other Jovian moons. It marked the first time a moon was discovered orbiting a planet other than Earth. The discovery contributed to the acceptance of the heliocentric viewpoint over the geocentric that held sway prior to that.
Now you know the answer to ‘what is the largest moon in the Solar System’ and a few interesting facts about Ganymede. Jupiter has 63 moons, so there are plenty more facts for you to discover.
A true-color image of Jupiter taken by the Cassini spacecraft. The Galilean moon Europa casts a shadow on the planet's cloud tops. Credit: NASA/JPL/University of Arizona
Jupiter, which takes its name from the father of the gods in ancient Roman mythology, is the largest planet in our Solar System. It also has the most moon’s of any solar planet – with 50 accounted for and another 17 awaiting confirmation. It has the most intense surface activity, with storms up to 600 km/h occurring in certain areas, and a persistent anticyclonic storm that is even larger than planet Earth.
And when it comes to temperature, Jupiter maintains this reputation for extremity, ranging from extreme cold to extreme hot. But since the planet has no surface to speak of, being a gas giant, it’s temperature cannot be accurately measured in one place – and varies greatly between its upper atmosphere and core.
Currently, scientists do not have exact numbers for the what temperatures are like within the planet, and measuring closer to the interior is difficult, given the extreme pressure of the planet’s atmosphere. However, scientists have obtained readings on what the temperature is at the upper edge of the cloud cover: approximately -145 degrees C.
Because of this extremely cold temperature, the atmosphere at this level is composed primarily of ammonia crystals and possibly ammonium hydrosulfide – another crystallized solid that can only exist where conditions are cold enough.
However, if one were to descend a little deeper into the atmosphere, the pressure would increases to a point where it is ten times what it is here on Earth. At this altitude, the temperature is thought to increase to a comfortable 21 °C, the equivalent to what we call “room temperature” here on Earth.
Descend further and the hydrogen in the atmosphere becomes hot enough to turn into a liquid and the temperature is thought to be over 9,700 C. Meanwhile, at the core of the planet, which is believed to be composed of rock and even metallic hydrogen, the temperature may reach as high as 35,700°C – hotter than even the surface of the Sun.
Interestingly enough, it may be this very temperature differential that leads to the intense storms that have been observed on Jupiter. Here on Earth, storms are generated by cool air mixing with warm air. Scientists believe the same holds true on Jupiter.
A close-up of Jupiter’s great red spot, an anticyclonic storm that is larger than Earth. Credit: NASA/JPL-Caltech/ Space Science Institute
One difference is that the jet streams that drive storms and winds on Earth are caused by the Sun heating the atmosphere. On Jupiter it seems that the jet streams are driven by the planets’ own heat, which are the result of its intense atmospheric pressure and gravity.
During its orbit around the planet, the Galileo spacecraft observed winds in excess of 600 kph using a probe it deployed into the upper atmosphere. However, even at a distance, Jupiter’s massive storms can be seen to be humungous in nature, with some having been observed to grow to more than 2000 km in diameter in a single day.
And by far, the greatest of Jupiter’s storms is known as the Great Red Spot, a persistent anticyclonic storm that has been raging for hundreds of years. At 24–40,000 km in diameter and 12–14,000 km in height, it is the largest storm in our Solar System. In fact, it is so big that Earth could fit inside it four to seven times over.
Given its size, internal heat, pressure, and the prevalence of hydrogen in its composition, there are some who wonder if Jupiter could collapse under its own mass and trigger a fusion reaction, becoming a second star in our Solar System. There are a few reasons why this has not happened, much to the chagrin of science fiction fans everywhere!
This cut-away illustrates a model of the interior of Jupiter, with a rocky core overlaid by a deep layer of liquid metallic hydrogen. Credit: Kelvinsong/Wikimedia Commons
For starters, despite its mass, gravity and the intense heat it is believed to generate near its core, Jupiter is not nearly massive or hot enough to trigger a nuclear reaction. In terms of the former, Jupiter would have to multiply its current mass by a factor of 80 in order to become massive enough to ignite a fusion reaction.
With that amount of mass, Jupiter would experience what is known as gravitational compression (i.e. it would collapse in on itself) and become hot enough to fuse hydrogen into helium. That is not going to happen any time soon since, outside of the Sun, there isn’t even that much available mass in our Solar System.
Of course, others have expressed concern about the planet being “ignited” by a meteorite or a probe crashing into it – as the Galileo probe was back in 2003. Here too, the right conditions simply don’t exist (mercifully) for Jupiter to become a massive fireball.
While hydrogen is combustible, Jupiter’s atmosphere could not be set aflame without sufficient oxygen for it to burn in. Since no oxygen exists in the atmosphere, there is no chance of igniting the hydrogen, accidentally or otherwise, and turning the planet into a tiny star.
Scientists are striving to better understand the temperature of Jupiter in hopes that they will eventually be able to understand the planet itself. The Galileo probe helped and data from New Horizons went even further. NASA and other space agencies are planning future missions that should bring new data to light.
Our beautiful, precious, life-supporting Earth as seen on July 6, 2015 from a distance of one million miles by a NASA scientific camera aboard the Deep Space Climate Observatory spacecraft. Credits: NASA
For those people who have had the privilege of jet-setting or traveling the globe, its pretty obvious that the world is a pretty big place. When you consider how long it took for human beings to settle every corner of it (~85,000 years, give or take a decade) and how long it took us to explored and map it all out, terms like “small world” cease to have any meaning.
But to complicate matters a little, the diameter of Earth – i.e. how big it is from one end to the other – varies depending on where you are measuring from. Since the Earth is not a perfect sphere, it has a different diameter when measured around the equator than it does when measured from the poles. So what is the Earth’s diameter, measured one way and then the other?
Oblate Spheroid:
Thanks to improvements made in the field of astronomy by the 17th and 18th centuries – as well as geodesy, a branch of mathematics dealing with the measurement of the Earth – scientists have learned that the Earth is not a perfect sphere. In truth, it is what is known as an “oblate spheroid”, which is a sphere that experiences flattening at the poles.
Data from the Earth2014 global relief model, with distances in distance from the geocentre denoted by color. Credit: Geodesy2000
According to the 2004 Working Group of the International Earth Rotation and Reference Systems Service (IERS), Earth experiences a flattening of 0.0033528 at the poles. This flattening is due to Earth’s rotational velocity – a rapid 1,674.4 km/h (1,040.4 mph) – which causes the planet to bulge at the equator.
Equatorial vs Polar Diameter:
Because of this, the diameter of the Earth at the equator is about 43 kilometers (27 mi) larger than the pole-to-pole diameter. As a result, the latest measurements indicate that the Earth has an equatorial diameter of 12,756 km (7926 mi), and a polar diameter of 12713.6 km (7899.86 mi).
In short, objects located along the equator are about 21 km further away from the center of the Earth (geocenter) than objects located at the poles. Naturally, there are some deviations in the local topography where objects located away from the equator are closer or father away from the center of the Earth than others in the same region.
The most notable exceptions are the Mariana Trench – the deepest place on Earth, at 10,911 m (35,797 ft) below local sea level – and Mt. Everest, which is 8,848 meters (29,029 ft) above local sea level. However, these two geological features represent a very minor variation when compared to Earth’s overall shape – 0.17% and 0.14% respectively.
Meanwhile, the highest point on Earth is Mt. Chiborazo. The peak of this mountain reaches an attitude of 6,263.47 meters (20,549.54 ft) above sea level. But because it is located just 1° and 28 minutes south of the equator (at the highest point of the planet’s bulge), it receives a natural boost of about 21 km.
Mean Diameter:
Because of the discrepancy between Earth’s polar and equatorial diameter, astronomers and scientists often employ averages. This is what is known as its “mean diameter”, which in Earth’s case is the sum of its polar and equatorial diameters, which is then divided in half. From this, we get a mean diameter of 12,742 km (7917.5 mi).
The difference in Earth’s diameter has often been important when it comes to planning space launches, the orbits of satellites, and when circumnavigating the globe. Given that it takes less time to pass over the Arctic or Antarctica than it does to swing around the equator, sometimes this is the preferred path.
![Synthetic view of the waxing Moon as viewed from Earth on 2013-10-15 17:00:00 UTC [NASA/GSFC/Arizona State University].](https://www.universetoday.com/wp-content/uploads/2013/10/tuesday_syntheticview_thumb.png)
.png){kind=link}
.jpg){kind=link}