The Japanese Aerospace Exploration Agency‘s (JAXA) has made some impressive feats in recent years. Roughly one year ago, and following in the footsteps of its predecessor, their Hayabusa2 spacecraft successfully rendezvoused with a Near-Earth Asteroid (NEA) – 162173 Ryugu. Since then, it has been collecting samples from the surface in the hopes of learning more about the formation and evolution of the Solar System.
Just a few months after the spacecraft created an artificial crater with an anti-tank warhead, the spacecraft has once again descended close to the asteroid to drop another target marker. This maker, a reflective sphere that contains the names of people who’ve supported the mission, will provide a visual guide as the spacecraft attempts to collect its second sample of material from the asteroid’s surface.
The target marker was deployed on Thursday, May 30th, at 07:18 pm PDT (10:00 pm EDT) when the spacecraft was between 10 – 40 meters (33 – 130 ft) from the surface of the asteroid. The agency tweeted an animation of the separation and descent from the spacecraft shortly thereafter, followed by a last-minute image of the separation almost a week later – on Wednesday, June 5th.
The latest image was taken when Hayabusa2 was just 9 meters (29.5 ft) from Ryugu and shows the spacecraft’s shadow on the surface, as well as that of the target marker. This successful deployment comes on the heels of a delay in mid-May, where the spacecraft was forced to abort descent operations due to an error with the spacecraft’s LIDAR data.
According to a report briefing filed by JAXA, the issue was the result of the spacecraft’s LIDAR instrument returning false data. When the instrument suddenly reported that the spacecraft was much higher than it needed to be – 50 meters (165 ft) – the science team aborted the descent and returned the spacecraft to its home position – 50 km (31 mi) from the asteroid.
According to the report, this error was caused by “noise data” that was factored into the adjustments, causing the LIDAR to lose calibration. Once the science noted the discrepancy in altitude, the spacecraft was pulled away from the surface to avoid an accident. While it is not clear what “noise data” refers to, this is not the first time that the spacecraft has had to abort a descent due to a glitch with the LIDAR.
Simply put, LIDAR (an acronym for LIght Detection And Ranging) relies on lasers to determine the range of an object. However, Ryugu’s has a very dark surface, which can make detecting reflected laser light rather difficult at times. In any case, JAXA reported that “After this event occurred, we found [an] adjustment method that could reliably prevent noise mixing. This will be adopted from now on.”
With this new method available, the spacecraft managed to successfully descend to within 50 m (164 ft) of the asteroid on May 30th and deploy its second marker. All that remains now is for mission controllers to decide if they will be collecting samples from this site (designated SO1), which is located close to the artificial crater they created.
Previously, mission controllers were not sure if SO1 was a safe enough place to land the spacecraft. While adjacent the crater was created for the express purpose of kicking-up material from the interior that would be unaffected by billions of years of exposure to the vacuum of space or solar radiation, mission controllers were not certain if the terrain was clear enough for a safe touchdown.
However, during the previous descent and aborted touchdown, close-up images from around the crater were obtained that revealed that it could, in fact, be safe to land there. The decision to attempt a touchdown and sample collection is expected to be announced by mid-June, with the touchdown itself taking place in late June or early July.
Further Reading: JAXA, Planetary Society
50 m is not equal to 31 ft.