Cracks in the secondary mirror on the Blanco telescope in Chile after an accident on February 20, 2012. Credit: Cerro Tololo Inter-American Observatory
[/caption]
An accident at the Blanco 4m telescope at Chile’s Cerro Tololo Inter-American Observatory has severely damaged a secondary mirror. The telescope is currently shut down for installation of the highly anticipated Dark Energy Survey Camera, and on February 20, 2012, the telescope’s f/8 secondary mirror was dropped during testing, resulting in fractures in the glass in the center of the mirror. Officials at the telescope said they are analyzing the extent of the damage to the mirror, and whether it extends beyond the visible cracks on the surface. They are also reviewing how the accident might affect the installation of the “DECam.”
Two staff members were injured during the incident, but are expected to fully recover. According to a post on the CTIO website, the f/8 had been removed for the installation of the DECam, and the f/8 was on the dome floor to test the focus mechanism. “The mirror and its back end assembly were being transferred to a handling cart to enable the tests. Unfortunately, the mirror was improperly installed on the cart and when the mirror was being rotated on the cart, the entire cart/mirror assembly toppled over injuring two of our technical staff,” said the report.
The mirror itself impacted the dome floor, causing the fractures, pictured above.
At this time, officials say it is not clear if the mirror is repairable or not and are reviewing what needs to be done to stabilize the cracks in the mirror. The accident is being investigated and initially, officials said they didn’t expect the incident delay the installation and commissioning of Dark Energy Camera as the f/8 is not required for the installation or operation of the Dark Energy Camera system. However, a later update said the DECam installation schedule was being modified to allow for the absence of the f/8 mirror.
The Dark Energy Camera will map 300 million galaxies with an extremely red sensitive 500 Megapixel camera, with a 1 meter diameter, 2.2 degree field of view prime focus corrector, and a data acquisition system fast enough to take images in 17 seconds.
The CTIO website said they would be providing future updates on the status of the mirror and the DECam installation.
Our previous article about the DECam.
Using new simulation suite, a team of scientists were able to conduct the largest set…
The iconic Very Large Array (VLA) in New Mexico has been at the forefront of…
Star formation is a complex process. But in simple terms, a star forms due to…
As originally planned, Juno’s 37th close pass by Jupiter – called Perijove 37 – would…
In this series we are exploring the weird and wonderful world of astronomy jargon! You should…
Early Monday, November 15, 2021, the International Space Station Flight Control team in Houston told…